Self-propelled Wood Crusher (Woodchip)

Self-propelled Wood Crusher (Woodchip)


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
Payment Terms
Negotiable
Production method
Negotiable
Shipping / Lead Time
Negotiable / Negotiable
Keyword
Category
Other Woodworking Machinery

Serim Chopmill Co., Ltd

Country / Year Established
South Korea South Korea /
Business type
Others
Verified Certificate

11

DUNS

Product name Self-propelled Wood Crusher (Woodchip) Certification -
Category Other Woodworking Machinery Ingredients -
Keyword - Unit Size -
Brand name - Unit Weigh -
origin Stock -
Supply type - HS code -

Product Information

Features of Feeding Section

  1. The feeding section is largely composed of a wide, large hopper and a feeding unit. The feeding unit consists four individual upper rollers and lower rollers. Each upper roller is designed to move up and down or back forth independently. Unlike a machine having a feeding section consisting of one upper roller and a lower chain, therefore, this machine provides strong pressing force when feeding wood. Wet, twiggy, crooked, or bulky woods can be fed smoothly without slipping, or being caught or clogged. Woods fed are cut in a securely gripped condition. This machine offers high safety, low load factor, low wear of blade, uniform size of chips, and high productivity.
  2. Both walls of the feeding section is provided with a few rollers to prevent woods from being caught, so that woods can be fed smoothly without being caught or clogged even when they are fed excessively. Therefore, high production capacity and logn service life of the machine can be obtained.
  3. The feeding section is placed low in order to relieve a worker's fatigue and improve work efficiency.

Features of Cutting Section (Blade Drum)

  1. A drum is designed not only to crush woods but also to produce sawdust.
  2. The drum is also designed to both crushing blades and sawdusting blades to be installed. If both blades are installed, crushed chips are produced. If the crushing blades are removed, sawdust is produced. Blades can be changed easily and in a short time.
  3. A blade is long and its both sides can be used. As it can be ground five or six times for use, its average lifetime is six to twelve months, depending on working conditions. Therefore, the consumption of blades is so low that a cost-saving effect can be obtained.

Features of Blade Assembly System (patented and certified by KT)

  1. Blades, blade sheaths and a sheath groove base are designed to be separated from each other so that is is easy to disassemble and reassemble them. If a blade or blade sheathh is damaged by stone or metal, it is needed to replace such damaged blade or blade only. Therefore, low maintenance cost is required, and permanent lifetime of a drum is guaranteed.
  2. Each two blades are fixed into a 15° inclined blade sheath that is firmly wedged into a 45° inclined groove of the sheath base. During cutting work, blades are not vibrated so that the sheath groove is not worn away. Lifetime of a blade and blade sheath is semi-permanent.
  3. A blade sheath is designed to have a large discharging passage for sawdust and crushed chips in order to ensure smooth discharge of sawdust and chips. Blades and the drum are not heated as wind is generated from the drum. Therefore, long lifetime of the drum and blades are ensured.
    In addition, uniform size of chips and low load factor result in high production capacity.

  4. * The conventional machines have many problems such as vibration of blades due to its vertical assembly, overheating resulting from small discharging path around the blades, severe wear of blade sheath and blade cover plate due to vibration of blades, severe overload caused by wood residues such as resin sticking to the blades, short lifetime of a drum and blades due to overheating, and irregular size of chips.
    However, Serim Chop Mill's machine has perfectly made up for these problems. It has also obtained the KT (Korean Technology) Mark in recognition of its quality and performance.

Features of Blade Assembly System (patented and certified by KT)

    Chips crushed by drums and discharged along the feeding belt (patented by Serim) installed at the bottom of the machine are fed to a long loading conveyor attached to the rear of the machine. The conveyor's height can be freely adjusted according to the height of a carrying vehicle. This section is designed to keep the area around the machine clean, facilitate moving and loading works, and generate no dust. (It has obtained the certificate of an excellent product from the Korean Public Procurement Service.)

Specifications

Model Cutting
method
Dimensions
(mm)
Weight
(Kg)
Materials
and
type of
blade
Size of
feeding
tray(mm)
Cutting
drum
dimensions
(mm)
Adhesion
Power
(HP)
Capacity
per
hour
Particle
L W H W H W Ø Cutting
chip
(woodchip)
CHOP
500C
Original
rotation
4230 2130 2950 4000 Special
alloy
1200 800 550 530 Engine
240
32~40
ton/h
Cutting
(woodchip)
CHOP
450C
Original
rotation
4230 2080 2950 3800 Special
alloy
1100 800 470 450 Engine
240
30~35
ton/h
Cutting
(woodchip)

B2B Trade

Price (FOB) Negotiable transportation -
MOQ Negotiable Leadtime Negotiable
Payment Options Negotiable Shipping time Negotiable

Serim Chopmill Co., Ltd

Country / Year Established
South Korea South Korea /
Business type
Others

11

DUNS

President
Ho Young, Park
Address
#102, Kayari, Jinryang-eup, Gyeongsan-si, Gyeongsangbuk-do, Korea
Product Category
Woodworking Machinery
No. of Total Employees
1-50
Company introduction

We are the multipurpose recycle handling machine manufacture company.
Ever since its foundation in the year 1989, We, Serimchopmill Co., Ltd., contribute environment-friendly industry fields all the time.

We manufacture wood crushers, sawdust machines, grinders, waste shredders, and screening machines.

Main Product

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My TK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more