Hastelloy C Mesh contains a large number of elements such as Cr, Mo, and single-phase austenite.
Hastelloy C Mesh has many excellent properties of corrosion resistant alloys have good resistance to oxidizing and moderately reducing corrosion. Hastelloy C Mesh is capable of withstanding high temperature, stress, severe corrosion and erosion prone environment. Hastelloy C Mesh details will be elaborated in the following.

An alloy composed of nickel, molybdenum, chromium and iron, Hastelloy C Mesh maintains its outstanding properties in extreme heat, holding its strength and resisting oxidation. Hastelloy C Mesh also resists chlorine and compounds with chlorine, as well as strong oxidizing acids, acid mixes and salts. One of the most corrosion-resistant alloys, Hastelloy C Mesh's exceptional in high-stress applications and in environments prone to repeated thermal shock.

Anneal: Heat at 2235=20 deg F for a length of time dedicated by the mass and cross section. Air cool generally to 1 to 2 hours.

Age hardening after annealing:

       Hold at 1575°-1600°F (857°-871°C) for 8-10 hours

       Air-cool to Rockwell C 35-40

       Hold castings for 16 hours at aging temperature to achieve hardness and high yield strength (not required or suggested to resist corrosion on for strength at high temperatures).

Combustion chambers

Heat-treating equipment

Collector rings, combustion chambers and exhaust stacks for high-heat applications in for conventional aircraft and jets

Pipe connections, pumps and valves for oil refinery, chemical and petrochemical applications

Can be machined at low cutting speeds

Use sintered carbide cutting tools and grind to 6-7 degree side clearance and 10-15 degree side rake angle for facing or turning operations

Use short drill and grind with minimum clearance to clear the work – generally about 140 degrees total – when drilling

Use sulfur-based oil coolant when drilling, or when turning, facing, or boring at higher speeds

Preheat to temperatures to 2200°-2250° F (1204°-1232°C)

Forge with hot working procedures:

        Hammering

        Pressing

        Rolling