Machine range of product

• Max. Film Width : 700mm (Finished bag width Max.600mm)
  
• Patch Handle film Width : Max.150mm
• Loop handle film width: Max.320mm
  

Production Capacity

• Actual production capacity is dependent on the bag size, film thickness, material etc. To maximize production capacity, Good quality, flat/even thickness film is very essential.
  
• Estimated production speed is as followings.
  Patch Handle Bag : 50-60bags/min
  Loop Handle Bag : 40-60bags/min
  Machine Speed : Max.100 cycles/min
  

Air-consumption : ABT.8Hp (Air-compressor is not included)
Electricity power : ABT.12kW
Applicable film : HDPE, LDPE (suitable thickness 35 - 60micron)

• Single Shaft unwind systems to unwind feel of PE film at a constant tension
• Single Roll unwinding shaft
• Roll Size : 500mm(D) x 700mm(W)
• Shaft for 3"Diameter Paper core
• Powder Brake & Automatic Tension controller
• Film exhausting sensor and automatic brake control system
• E.P.C (Edge Position Controller) for Web-guide control

• Slitting Knife for opening tube film
  
• Continual folding bar : Both side
  
• Bottom Gusset bar and rotary plate
  
• Guide rollers

• Dancer roller is installed to compensate unbalanced feeding length between 2nd feeding and unwinding
• 800mm width roller
• Dancer speed control
• Regulated air loaded dancer arm assembly
• A.C Drive motor

• After top folding, longitudinal sealing is needed for reinforce fold film
  
• Linear shaped sealing heater - 2sets
  
• Air-cylinder : 2sets
  
• Temp. Controller installed independently

• Unwinding Shaft
  
• Patch film Feeding : By Air-cylinder
  
• Cutting type : Heated flying cutter
  
• Sucking & Rotary plate
  
• Sealing Bar : 2sets (upper & lower)

• Reinforce sealing Heater : Cartridge heater 2sets (Up & Down)
  
• Air-cylinder type
  
• Temp controller installed

• Unwinding shaft: 400MM width
  
• Loop film supplying: by Gear
  
• Cutting type: Knife cutting by Air-cylinder
  
• Loop film holding and transferring to inside of main film: by Gear
  
• Loop sealing: Total 4sets (Up&Down, Left and Right)
  
• PLC control system

• For Patch Handle bag& Die-Cut handle bag
  
• Air-cylinder
  
• Handle shape : Buyer's choice
  
• P.L.C Control System

• A.C Servo Drive system feed the film accurately ad desired length to the sealing station
  
• Driven by A.C Servo Motor (Mitsubishi brand)
  
• Air-Finger bar installed upper & lower
  
• Automatic Bag length adjustment : variance +/-0.1mm
  
• Mark Sensor installed for sensing sealing position

• Sealing bar : Cartridge Heating method - 800mm(Side sealing type)
  
• Rotary type Silicon roller
  
• Out-feeding conveyor installed
  
• P.L.C Control
  
• Main Motor : A.C 3Hp(Inverter Speed Control)

• Independent counter via P.L.C Control
  
• A.C Drive motor
  
• Auto-counter & Buzzer
  
• Conveying by Belt