TC-2010 is used for the web tension control of industrial machine; its function is especially configured for the “Central Guiding” type in the Process of Tension Control System. Its features are listed below:

1. It contains the function of digital type line speed proportional link control, which could hold the tension stable in the process of line speed from start, acceleration, deceleration, to stop.

2. Multi-level P.I.D control could make the speed stable fast in the variation of speed.

3. LED phonemics display with large screen and high brightness, could indicate “Kg.M/min....” by the selection of “SRC” parameter.

4. The function of parameter can be indicated by symbols, which are the abbreviation of English strings, it is easy to operate without reading the instruction manual again.

5. The LED display can indicate RUN state, High Limit Point(HIP), Low Limit Point(LOP) and abnormal messages(ALM).

6. The terminal offers one set of encoder or pulse signal, which could be as the input signal of line speed.

7. The input signal of line speed also accepts the analog signal of DC 0-10V.

8. There are two sets of digital multi-function contact, which can be programmed for the compensation of acceleration or deceleration.

9. The terminal offers Output signal of DC 0-10V as the display of real tension.

10. It contains communication function of RS-485, can connect to PLC, Human Interface, Industrial PC for control.

11. The output signal DC 0-10V of terminal could directly control Torque Controller, Current-Control Mode Vector Inverter, DC Motor Controller, Servo motor Drive.

12. It could work with the tension detector, 5kg~400kg(50NM~4000NM) Euntay LMS series tension detector.