Multiple-Belt Oil Skimmer
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Brand name
- OilSeizer
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Category
- Water Treatment
KUM-IN CORPORATION
- Verified Certificate
-
16
Product name | Multiple-Belt Oil Skimmer | Certification | - |
---|---|---|---|
Category | Water Treatment | Ingredients | - |
Keyword | oil/water separator , floating oil grabber , multi-belt oil skimmer , surface oil remover | Unit Size | - |
Brand name | OilSeizer | Unit Weigh | - |
origin | Stock | - | |
Supply type | - | HS code | 842129 |
Product Information
OILSEIZER®
Multiple-Belt Oil Skimmer
KOS-B-SR-MT series Multi-Belt Skimmers, comprising two or more belts arranged in a row, are used to quickly separate or remove a great amount of floating oils or oily scums from water or solutions, primarily at steel mills, iron mills, petrochemical plants and oil refineries, in situations where much process water or wastewater tanks or reservoirs usually are covered with wide-spreading, layer-forming immiscible oils that flow in from different sources in the process of manufacture.
Features
- State-of-the-art design based on the oil-water separation technology of over 20 years.
- Rugged construction and proven performance (e.g. A five-belt model can remove oil up to 1500LPH.)
- Minimal mounting space and easy installation
- Several models available for selection according to oil influx amount
- Oil discharge chute for quick drainage of oils and oily scums as soon as oil-sticked belt passes through a set of wiper assembly and oils get wiped off from both belt side surfaces at the same time.
- Two side access doors on both sides left and right of each belt enable selecting the direction of positioning the skimmer. Additionally it allows not only easy replacement of tail pulleys and wipers but easy cleaning of the oil discharge chute as and when required.
- Transparent pane of side access door admits instant observation on how the belt moves and oil being wiped off, whenever required
- Selective endless belts, polymer, stainless steel, chemical-resistant, or high temperature-resistant, according to liquid characteristic
- Once the sliding clear front access panel is removed, endless belts can easily be installed or removed for a handy replacement with the advantage of being endless
- Oil- and wear-resistant wiper blades to closely contact with both belt sides
- Pulley yokes and chains to prevent tail pulleys from deviating or falling off
- Optional motor cover to protect against direct rainwater or sunray in outdoor installation
- Skimmer housing made of stainless steel (SS304) or powder coated steel
Specifications
Model |
KOS-B3020SR-2MT |
KOS-B3020SR-3MT |
KOS-B3020SR-5MT |
Remarks |
Oil Removal rate (max. per hour) |
600~670ℓ |
900~1000ℓ |
1500~1650ℓ |
motor oil #30, at room temp |
Gearmotor (IP23) |
400W |
400W |
746W |
3Ph (or 1Ph) |
Head Pulley (Nos.) |
200mm (2) |
200mm (3) |
200mm (5) |
|
Tail Pulley (Nos.) |
200mm (2) |
200mm (3) |
200mm (5) |
incl. york/chain |
Belt width (Nos.) |
300mm (2) |
300mm (3) |
300mm (5) |
from 300mm up to |
Dimension (LxHxD) |
486x770x1475 |
486x770x1900 |
486x770x2750 |
(mm) |
* Pre-installation considerations
Direction of positioning the skimmer (use of either side access door adjacent to wiper assembly sets recommended), hourly peak of oil influx, state of oils (floating, free-flowing) ․ tank (aboveground or underground) ․ height of skimmed oil holding container ․ lowest water level․water temperature ․ electric voltage ․ etc.
* Installation of skimmer, stand frame and electric wiring are not included in scope of supply unless otherwise expressly stated in sales contact
* Options
- Belt length: min. 300mm (measured from skimmer base down to tail pulley center, in an increment of 300㎜ up to max. 3000mm or as required. When the skimmer requires an elevated installation over floor level, the extension of belt length should be considered.)
- Motor electricity: Customer's voltage, phase, hertz are required along with selection of on-off switch or control box. On-off switch comes standard for single phase motor only.
- Motor cover: an option protects against direct rainwater and sunray in outdoor installation
- Timer, stand frame, motor (belt turning speed controller, waterproof, explosionproof)
- Skimmer housing material in stainless steel (SS304) or powder coated steel
* For more information do not forget to visit our website www.kum-in.co.kr.
* OILSEIZER® is a registered trade mark of Kum-In Corporation.
* For technical improvement, design and specification subject to change without prior notice.
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- KIM CHUL BOK
- Address
- No.103 Daeryung Technotower, 493 Gasan-dong, Geumcheon-gu, Seoul, 153-774 KOREA
- Product Category
- Chemical Machinery Equipment,Industrial Supplies,Water Treatment
- No. of Total Employees
- 1-50
- Company introduction
-
Dear Customers,
Welcome to our website!
Our company has manufactured and exported quality oil/water separation equipment and associated products since 1989.
Especially our multiple-belt oil skimmers 'KOS-B-SR-MT series' are enjoying a good reputation among overseas and domestic steel and iron mill customers for the unique stable and state-of-the-art design based on the advanced technology through the continuous technical development supported by ample field expertise in the arena of oil-water separation of over 20 years.
Our OILSEIZER® products are briefly summarized as below:
-
Belt-Type Oil Skimmers Basic Model (Small Size O/W Separator included)
-
Belt-Type Oil Skimmers Model OSS-B (formerly Small Oil Skimmers)
-
Oil Scum Skimmer (formerly Scum Skimmer)
-
Multiple-Belt Oil Skimmer
-
Oil/Water Separators, Pack-Type
-
Integrated Oil/Water Separators, Pack-Type
-
Centrifugal Soild/Liquid Separators 'sludgeFREE'
We always do every efforts to meet customer needs in terms of quality, pricing and service.
Any inquiry you make will attract our prompt attention. We hope to have an opportunity to work with you in the near future.
Again, thank you!
Kum-In Corporation
103 Daeryung Technotower-5, 493 Gasan-dong, Geumcheon-gu, Seoul 153-774 Korea
E-mail: info@kum-in.co.kr
Website: www.kum-in.co.kr
Phone: 82-2-2107-7685/6. Fax: 82-2-2107-7687
* OILSEIZER® and SOLIDSEIZER® are registered trade marks of Kum-In Corporation.
-
- Main Product
Related Products
Hot & Cold Water Dispensers (Made in Korea)
BK GRP SECTIONAL WATER TANK
Grease Trap M-43(D)
Turbowin Turbo Compressor (WH Series)
Turbo Blower : We are looking for resellers!