Epoxy Dry Type Injection Resin for Concrete Crack

Epoxy Dry Type Injection Resin for Concrete Crack


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
Payment Terms
Negotiable
Production method
Negotiable
Shipping / Lead Time
Negotiable / Negotiable
Keyword
Category
Other Constructions

R&R Chemical Co., Ltd.

Membership
BIZ
Country / Year Established
South Korea South Korea /
Business type
Others
Verified Certificate

16

DUNS

Product name Epoxy Dry Type Injection Resin for Concrete Crack Certification -
Category Other Constructions Ingredients -
Keyword - Unit Size -
Brand name - Unit Weigh -
origin Stock -
Supply type - HS code -

Product Information

Dry type injection

RE-100 epoxy injection is 100% non-solvent product. It is not shrunk after hardening. It is widely used epoxy injection with strong adherence and exceIIent mechanical strength for cracks.

Features

  1. Non-solvent product.
  2. lt can be into normal structural cranks by general injector as it has low viscosity
  3. lt has excellent mechanical strength.

Uses

Injection for cracks of concrete structure.

General property

  RE-1000 Remark
ltem Resin Hardener  
Contents Epoxy Poly amid amin  
Appearance Transferent liquid Yellow transferent liquid  
Mixture ratio/weight 100 50  
Gravity 1.19 0.98  
Viscosity (mpa.s)/Mix 190±30 23±0.5℃
Pot life (Min) 40 over 25±2℃
Perfect hardening (day) 7  
Package unit 10Kg 5Kg  

Mechanical property

  RE-100 Test method 
Adhesive strength (N/mm2) 6.0 + KS F 4923
Tensile strength  (N/mm2) 15+ KS F 4923
Hardening shrinkage (%) 3- KS F 4923
Tensile elongation (%) 10- KS F 4923

How to Use

lt should be used with after mixing resin with hardener with correct mixture ratio as it is two liquids phase. Pot life may be vary from temperature and the amount of ,mixture. It the amount of mixture is large or the temperature of the place is high, pot life and hardening time becomes fast.

lf possible, use small amount of resin and hardener when injecting with structural injector or single liquid phase grouting injection pump(SGI-100,SGI-200) and use the mixture as soon as possible without delay. Particularly, make a mixture in small amount for injection in summer and increase the temperature of the resin in winter. For smooth injection, make sufficient air-vent in injection.

  1. When injecting using structural injector(refer to standard specification).
    weigh the resin and hardener correctly(resin 1Kg and hardener 0.5kg) and put about 30cc of mixture into structural injector after mixing well with electric mixer then inject the mixture after connection with installed pedestal(refer to low pressure injecting method).
  2. When injecting using single liquid phase grouting injection pump(SGI-100, SGI-200), weigh the amount of resin and hardener correctly(resin 1kg, hardener 0.5kg) and mix them well with manual or electric mixer and then pour the mixture into the container of injector and inject them through packer or mighty injector installed at crack part by operating the switch of the equipment(refer to high temperature injection method).
  3. When injecting using two liquids phase grouting injection pump, pour resin and hardener into each container of the equipment and check if resin is mixed with hardener well and then inject them through packer, mighty injector or port installed at crack part

Equipment, instrument and cleaning agent

Use structural injector, mighty injection, PORT , single liquid grouting injection pump(SGI-100, SGI-200) and two liquids grouting injection pump. Clean the equipment or tools used immediately after working with toluene, acetone, MEK or epoxy thinner. Fill the injector with oil after using.

Precautions

  1. Please wear proper safety equipments including helmet, protective glasses, gloves and working cloths when handling the agent.
  2. Wipe out immediately and wash with soaping water when skin is stained with the agent.
  3. Please show a doctor if there is eruption of skin by staining with the agent.
  4. install a ventilator at working place to get fresh air.
  5. Keep correct mix ration when mixing resin and hardener in case of two component type grouter.
  6. Clean out instruments or equipment used for working with thinner etc.
  7. Mix smaller amount of resin in summer as its pot life, drying time, hardening time may differ by temperature or mixing amount. Increase the temperature of resin in winter season.
    Pot life : Time period of work with the mixture of resin and hardener.
    Drying time : Time period from the property of mixed resin begins to change to the time of hardening. After this time, we can not work with the mixture.
    Hardening time : The time to get mechanical strength as the agent hardens completely(it should be at least 7 days and final strength can be measured at this time.)
  8. Do not use if it is below than 5℃ except unavoidable situation.
  9. Please refer to MSDS (Material Safety Data Sheet) for proper handling.

How to keep

Keep it dry and cool place without moisture after sealing the cover to prevent contacting with the air. proper keeping temperature is 15~30 ℃ keeping period of the liquid is 6 months. However, use the agent as soon as possible as it may deteriorate by keeping condition.

B2B Trade

Price (FOB) Negotiable transportation -
MOQ Negotiable Leadtime Negotiable
Payment Options Negotiable Shipping time Negotiable

R&R Chemical Co., Ltd.

Country / Year Established
South Korea South Korea /
Membership
BIZ
Business type
Others

16

DUNS

President
Jae Jun, Lim
Address
1F, Yongdoo Bldg., 740-2, Yongdu-dong, Dongdaemun-gu, SEOUL, KOREA
Product Category
Other Chemicals,Other Constructions
No. of Total Employees
1-50
Company introduction

ln introducing ourselves to you we are pleased to comment that we have been engaged in one-component polyurethane resin product,one-componet grouting injection pump mashine, various packers, two-component ARC(Acrylic Resin Chemical) procuct of all descriptions to all over the S.Korea and some other nations enjoying a good reputation for a good many years.

We may state that should you favorably consider our proposal and favor us with inquiries for your specific requirements we are in a position to supply you with A1 goods at competitive prices.

We look forward to your early and favorable reply.

Main Markets

Malaysia Malaysia

Main Product

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My TK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more